Shima Solidpro Textile Sports Touring Jacket Fluo

The proper fitting is user responsibility. The garment should fit snugly but not too tightly: no discomfort should be caused by the clothing when taking your normal riding position and you must be able to reach the controls easily.

To determine the exact size correctly, measure close to the body. The meter should not be tight. When measuring, it’ s recommended to wear only lightweight, fitted clothing and stand in a loose but upright position. To make the measurement more accurate, ask for assistance another person. If the measured values are between different sizes – always choose a larger size.

INSTRUCTIONS & CERTIFICATES:

Wash or clean your garment following the washing instructions on the stitched label.

Remove the inner protectors before washing your garment and make sure to insert them again in the dedicated pockets after washing! Never tamper with the garment in any of its parts. When not in use, the garment must be stored in a dry and ventilated place. After use leave it dry in a well ventilated place, at room temperature.

Care Instructions for JET JACKET:

• Before washing detach each layer and remove protectors

• Use mild detergent

• Do not use fabric softener

•  Hand wash 30°C

•  Do not bleach

• No dry cleaning

• Do not iron

• No wringing

• Drip dry verticaly in shade

Use same instructions as above for cleaning waterproof membrane.

To clean the protectors:

• Remove dirt with a damp cloth only; for heavier soiling use damp cloths or soft brushes with lukewarm water (max 40°C).

• Do not wash under running water

• Do not use hot water, solvents or other chemicals to clean the protector

• Use specific products for cleaning and maintaining leather

• Do not leave exposed to direct sunlight

• Do not leave it permanently exposed to high or low temperatures

• Do not use dryer or other heating devices

MATERIAL:

Outer shell

100% Polyester

Lining:

100% Polyester

Waterproof membrane:

70% Polyester

30% Polyurethane

SOLID PRO was created as a city jacket with sporty design. The ergonomic construction means that some parts are already curved for a slightly sporty position. Thanks to elastic material panels on elbows you have greater range of movement while breathable fabric inserts on sleeves and back ensure smooth fit. SOLID PRO comes with external TPU sliders and additional fabric reinforcement on shoulders and elbows. SHIMA ADVANCED PROTECTION stand for our philosophy of making more secure products. SAP logo label means that on design level the product has been prepared for taking into account different types of crashes riders involve into and has been prepared for handle them.

Multi-seasonal functionality:

The SOLID PRO has 2 additional removable layers. What makes it easy to adjust the heating or waterproofing if necessary. When weather is getting sticky you could cool your body off using ventilation panels placed in upper chest, forearms and back area. For even more effective airflow we redesigned long H3- zip air-vent located alongside the main zipper. So you could quickly turn the zipper into an efficient large ventilation panel.

Advanced protection:

Jacket is equipped with set of standard polymer protectors certified with european standards. SHIMA ArmorPlus back protector as well as shoulder and elbow protectors are included in set which you could extend by optional SAS-TEC chest protector – sold separately. SOLID PRO was crafted with high density X-Shell weave fabric and double reinforced safe seams for the best level of protection. The X-Shell fabric contains a mix of tightly-woven polyester and polyamide fibres. Thanks to this, the fabric has a semi-matte sheen and is pleasant to the touch. An Additional, external PU layer has been molded with the fibers featuring an additional hygroscopic overlay to prevent water.

Comfort fitting:

SOLID PRO was detailed with attention. To provide maximum usability, the jacket features width adjustment and also possibility to fit the collar. The fitting can be adjusted by a movable snap fastener. If you want to pair your jacket with SHIMA trousers you can easily do it with one of the available connecting zippers: 360 or short zipper depending on your needs.

Hide me:

Wondering what to do with the gloves when you get off the motorcycle? The jacket has a back pocket for the gloves so that they wouldn’t get stuck anywhere. The pocket is almost imperceptible and what’s more, it can be used to hide other small items while riding. This model is equipped with numerous reflective panels for better exposure after dark. These reflective inserts, made with microspherical glass fibers, remain discreet and stylish part of jacket design during the daytime and provide the perfect visibility after dark.